Tunnelling – using EC2 as web proxy – complete guide

This is complete quite to tunnelling and proxying for using EC2 Instance as a web proxy allowing you to direct web traffic through Amazon server.

Why did I write this post?

Tunnelling through EC2 Instance is not a new topic and there are tones of resources showing how to do it in one or the other way for “a” platform.
As an active developer switching between my machines and VMs from Mac IOS to PC Windows to  Ubuntu I like to be able to perform freely common activities including tunnelling (from time to time). I like to experiment with new devices, computers and occasionally I do treat myself new machine, on which all services, apps, configurations and settings have to be installed and applied in order to make it optimised or even usable for development purposes. I wrote this post to have all the information I need in one place so instead of googling it every single time I can come back here no matter what platform and operating system I am using. Perhaps you can find it useful too so lets jump into it.

What is tunnelling and why to do it? 

Answer to this question is quite obvious for those who know it and as you are here already there is good chance you already know why you are going to set it up, in that case skip this paragraph.

Wikipedia describes tunnelling as using one protocol called the delivery protocol to encapsulate another payload protocol. That provides ability of using one protocol to carry a payload over an incompatible delivery-network. Another scenario would be providing secured path through an untrusted network or creating new path over firewall blocking some traffic.

So in lame terms it means access to places you wouldn’t be able to access without the tunnel. For example if you are in Europe and you can’t open US site you will be able to do it through the tunnel. Another practical example would be accessing thePirateBay blocked by BRMI (British Recorded Music Industry) from UK. Remember that some sites are blocked because of Law restriction so accessing them you will do at own risk. Even though this article shows how to access places like The Pirate Bay from UK, it does not encourage you to do it. Use Internet responsibly!

 

Using  EC2 Instance as a Web Proxy

EC2 Instance with SSH access

If you need full manual how to create and prepare your server on AWS check Anazon Web Services documentation or check out LAMN : Launching first EC2 instance. Assuming you already have one make sure you can access it through SSH. I will not go through complete server prep here but here is check list to go through:

Log in to the server with SSH

Install TinyProxy

Remember to sudo yourself. Doesn’t matter which platform you have to have root access

  • Installing on Ubuntu is very straightforward

  • Installing TinyProxy on CentOS requires extra step

 Configure Tiny Proxy

Use your favourite editor to edit config file

Find out your public IP address with  www.whatismyip.com site or if you in local terminal just type :

Find “Allow” section and edit it so it’ll look like:

IF you are on dynamic IP you might want to remove or (better) comment that line. It will allow traffic on TinyProxy port from any IP address. Not the safest option but will work.

You can also change mapped port in “port” section to lets say 8888

Connect to the server

Connecting from IOS is not difficult but requires you to type below command into your terminal command line replacing user name, server address and path to your .pem file with the right data.

Best will be to create alias using your .bash_profile file, so open it with your favourite terminal editor like pico

And paste below line aliasing above command to a simpler one like  proxystart

Re-open terminal and you will be able to start your proxy connection by typing proxy straight from the command line. It will open connection and set the whole process in background.

Note: Remember that it won’t autostart with your system, so if you reboot your mac you will have to start manually.

Option 1: Configure your browser

With proxy set up on your EC2 instance it is possible to configure your machine to connect to Internet with all protocols through the proxy however the best way might be just to set one browser to use tunnel and leave everything else as it is. Personally I am fan of that approach. I have few browser installed out of which only Firefox is connecting through web proxy. To configure that you would have to open Network settings in your browser and select ‘use proxy’ as shown below using port 3128 and address localhost as we already tried it. Here is the image how it could look for Firefox

Firefox-proxy-setup

 

(more to come)

Freelance developer, IT enthusiast, blogger with entrepreneurial spirit and passion for making games

Tagged with:
, , , , , , , , , , , ,
Posted in
AWS, Technical
Categories